LED Tubes with Cables: Direct Connection Without Ballast

LED Tubes with Cable – Optimal Replacement for Fluorescent Tubes with KVG, EVG, VVG

The T8 LED tubes with cable are the optimal replacement for conventional T8 fluorescent tubes. The T8 Highline LED tubes come with a 3-pole connection cable. This allows them to be directly connected to the mains and operated without a ballast. They are thus considered a standalone luminaire rather than a lamp, making them eligible for various funding programs. This provides you with:

• No power loss due to a ballast, resulting in higher energy efficiency!
• No noise from buzzing ballasts!
• No mains-related 50 Hz flicker!
• Less wattage – more lumens!

Additionally, the different lifetimes of the ballast and the LED lamp must be considered. When replacing a fluorescent tube, future maintenance is required as ballasts may need replacement. This can be avoided with a LED tube with cable connection. The lamp is available in cold white, neutral white, warm white, as well as 120cm/22W and 150cm/33W.

The T8 ISOLED® Highline LED Tubes – Robust and Shatterproof!

Thanks to a polycarbonate tube cover, the T8 LED tube is much more robust than acrylic or PVC. This cover withstands impacts of at least 30 Joules, equivalent to a 6 kg object falling from 0.5 m onto the cover. The melting point of polycarbonate is 850° Celsius.
Advantages of our T8 ISOLED® Highline LED tube with 3-pole connection cable:

• No additional unnecessary power consumption from ballasts
• No power loss of the ballast
• No 50 Hz flicker (ballast is no longer connected to mains)
• No noise from buzzing ballasts
• T8 ISOLED® Highline tube counts as a fully functional LED luminaire
• No intervention in the luminaire body → compliance remains intact
• No additional approval or certification required
• The 3-pole connection cable additionally grounds the metallic heat sink via the protective conductor
• Reversion to fluorescent tube possible without risk
• Fixing with pins in tube holder unchanged
• Mounting with clips directly on the T8 ISOLED® Highline tube possible
• Less wattage – more lumens
• Significant cost savings!