Separation point: 33,33mm with 6 SMD each | Pitch (light point center-center): 5,56mm | 1 unit (roll) = 5m | max. flex stripe length per infeed: 5m | length tolerance + thermal expansion: 1% | no cooling profile required | without adhesive tape! | silicone encapsulation | Special feature: 30cm 2-pole single cores on both sides, connection at the front, with MiniAmp male plug L814 | Note: metal end cap slightly protruding in width, horizontally bendable (bending radius min. 60mm) | Flame retardant and flame resistant (IEC 60695-11-5), IK08 (IEC 62262), salt spray resistant (IEC 60068-2-11:2021), UV resistant (ASTM G154-2016)
Nominal voltage
24 V DC
Rated power
10 W/m
Active power
10 W/m
Efficiency in lm/W
28
Luminous flux in lumen
280 lm/m
RGB light source
No
Color temperature
4000K
Permissible ambient temp.
-20°C - 40°C
max. ambient temperature in °C
40
min. ambient temperature in °C
-20
CRI Ra
90
Beam angle
120°
Dimmable
Yes
Dimming type
PWM
Protection class
IP67
Housing material
Silicone
Potting material
Silikon
LED chips per metre
180.000000
LED/roll
900,00
Properties of connection cable
Einzeladern 300mm beidseitig, Anschluß stirnseitig, mit MiniAMP Stecker, (2-polig)